The usage method of the glue gun is very simple. First of all, please make sure that the power supply of the glue gun is properly connected and turned on. Then, insert the glue stick into the glue cylinder of the glue gun, making sure the glue stick is firmly inserted. Next, press the switch button of the glue gun to start heating the glue stick. Generally speaking, the heating time of the glue stick is about 2 to 5 minutes. After the glue stick is completely melted, the glue gun can be used.

When using a glue gun, please aim the nozzle of the glue gun at the area where glue needs to be applied, and then gently press the trigger of the glue gun to apply the glue evenly. When applying glue, keep the glue gun at a certain distance from the working surface to avoid scalding or burning the working surface.

Also, pay attention to safety when using a glue gun. When heating the glue stick, avoid direct contact with the heating part to prevent burns. At the same time, when using a glue gun, keep it away from flammable items and ensure that the glue gun is on a stable workbench.

The glue gun is a commonly used bonding tool, featuring high viscosity and cost-effective functionality. It is hoped that the above usage methods can help you use the glue gun better and improve work efficiency.

Prepare the tools and equipment: one screwdriver, one bottle of sealant and one glue gun.

Use a flat-head screwdriver to gently insert a small hole into the rubber end of the sealant so that the sealant can flow out.

Use a flat-head screwdriver to make a small hole in the small iron cover at the end of the sealant, and then gently remove the small cover.

Screw the nozzle clockwise onto the sealant head through the thread of the sealant head.

Place the black fixing ring of the glue gun at the end of the glue gun. The purpose of doing this is to ensure that the sealant can be smoothly inserted into the glue gun.

Press the small spring of the glue gun with one hand and adjust the extended arm of the glue gun to the maximum with the other hand. The purpose of doing this is to allow all the sealant to enter the interior of the glue gun.

Start the glue gun from the tail and insert it bit by bit. When only the glue nozzle is exposed, it indicates that the entire sealant has been inserted into the glue gun.