FL-277AA 125W
Thermostat hot melt glue gun heated by Nickel-chromium wire,
bigger power,shorter preheat time,bigger flow of glue.
Using the most advanced integrated microcontroller and over-temperature protection device,
it is unique in the international market.
CONTROL TEMP BY CHIP ,
ADJUSTABLE THE TEMP EACH 10 DEGREES ,FROM 100 DEGREES~200 DEGREES
Voltage | 110V~230 V |
Power | 125 W |
Preheat.time | 2-3 minutes |
Flow of glue | 10-25 g per minute |
Glue stick D.M. | 11.2 mm |
Item | FL-277AA |
Material | PA6 |
Packing | Blister pack(with 2pcs glue sticks) |
Carton.Size | 63x35x59 cm |
Quantity per carton | 24 PCS |
G.W/N.W | 18/17 Kgs |
Quantity/20’container | 4416 PCS |
Applicaliton:
1.the toy model
2.Artifical flowers,christmas tree
3.Decorations,the metals product
4.the wood product,
5.Electronic circuit plak
Descriptions:
>Load one glue stick
>Heatting gun for few mins and pull the trigger
>Don't touch the nozzle and melted glue
>Keep away from Children.
>Must be used under supervision of adult during doing craft works.
>Power:120V~230V, 50Hz, 125W,
>volume:25g/min
Use methods of the glue gun :
1.Make sure that the working voltage was at the level of 120V~230V.
2.Set up the holder,put the gun horizontal and the glue jet downward.
3.Insert the glue stick into the glue gun.(glue stick diameter 11.2mm available)
4.Connect with the power supply and pre-heat the glue stick for 1-2 minutes till it melt completely.
5.Pull the trigger slightly to let the glue flowing out.
6.Cut off the power supply when you finished the work